Dax Johann
Kirchberg near Mattighofen
Here are some reasons why I chose the MSW quick-change system:
- So that you do not have to connect and disconnect the hydraulic lines.
- To avoid oil stains on the farm loader or on the floor if the line is under pressure again and coupling is not possible.
- Avoid repeated up and down at the farm loader.
- To avoid dangerous situations if you do not take the time to use the right attachment (e.g. pallet fork instead of round bale tongs).
- Stress-free coupling at peak times, e.g. at harvest time.
- Operational assistants or non-operating personnel can also use devices at any time without having to know the arrangement of the hydraulic lines.
- Can be installed regardless of the manufacturer of the yard loader or front loader.
- Retrofitting to existing machines or attachments possible.
- You are not bound to a recording standard of a manufacturer!
Basically, I can recommend an investment in the quick change system from MSW!
Operation data:
We are a dairy farm with a focus on organic hay milk with pasture
Milking has been carried out with a robot since 2019, approx. 30 ha of usable area are cultivated
I am a full time farmer and my wife works as an elementary school teacher.
Thomas Albrecht
Isny-Schwanden (Germany)
Thanks to the high-speed oil coupler, the front loader can now be fitted with the correct implement without having to leave the tractor. I have the kit installed on a Merlot and I'm very satisfied.
It can now be reassigned quickly and easily. Never get down again - great.
Thomas Albrecht
We congratulate Mr. Albrecht on the technical implementation and thank you for the trust you have placed in us.
We are always enthusiastic about the wealth of ideas of our users and wish Thomas Albrecht much pleasure with his Highspeed Oil Coupler.
Thomas Mosl
Bernhard Költringer
Elixhausen / Austria
Since we bought a new Weidemann E-Hoftrac in the year 2018, and ours
old Hoftrac already had a coupling system from Faster on it, it was clear to us from the beginning to equip our new device with it again.
But then by chance we came to YouTube on a video of the company MSW. And then we quickly realized that this
Coupling system is the right one for us. The deciding factor was that we had over ten tools for our Hoftrac
and four of which are hydraulic.
Since we have been using this device for over a year now and are extremely satisfied with the product, we can
we only recommend it!
The advantages of the quick coupler are: No more jumping off when coupling
I stress no more jumping off! (Low back pain)
The Annoying Oil Smear finally comes to an end!
Depressurizing the machine was yesterday!
no more dirt at the coupling point!
We would like to thank you again for the competence and handshake quality of the company MSW Mösl!
Hourly output E-Hoftrac: 540 hours / year.
Dome Gear: About 3000 / Year.
With best regards family Költringer
We would like to thank the Költringer family for the trust they have placed in us and wish them continued enjoyment and health-friendly working with the Highspeed Oil Coupler.
Thomas Mosl
Pierre Witry
Luxembourg
As a dairy farm, a Bobcat skid steer loader is the most important work machine in the yard, from feeding the cattle herd to stabling, cleaning the yard, loading bales and bulk materials, to major construction work.
With 10 device change per working day, I was looking for a comfortable and practical solution, especially for coupling the hydraulics. From the skid steer loader manufacturer there may well be a hydraulic locking of the implements, but you still have to dismount to connect the hydraulic hoses.
I have known the Mösl system for some time, but due to the design it is not possible to fit it into the Bobcat original mount.
So I decided (most of the implements were rebuilt from Euronorm to Bobcat mount) to restore all devices to Euronorm, and install the MSW Coupler in a self-made Euronorm adapter. This is very compact and short, so that the cultivation points are not moved forward. Millimeter work was, however, the entire MSW Coupler complete with hydraulics in a very small space to accommodate, without changing the original recording.
For a short time now I have the MSW Coupler in operation and I am very excited, the device change works wonderfully and within seconds. In the past, I often thought about how to design my workflow to change devices as little as possible (or the attached devices were "misappropriated" eg bale loading silage tongs, which often ended with the press yarn cut through and the bale already tucked in) Camp fell apart or broken tines, etc. I think every farmer knows this)
Now it is really fun to change devices, you always take the right device for the job, no matter how many times you have to hang. As a result, loaders, equipment and people are spared.
A huge advantage, especially with the skid steer loader (where you get out of the front of the cab), you no longer have to climb over the implement to couple it. For me a big plus in terms of security. Meanwhile, I hang most equipment before getting off, an additional step, I have attached to the Euro frame, so I can safely get on and off without climbing.
Already after a short time, I can recommend the MSW Coupler to anyone, the investment pays off quite quickly by faster changes but above all by the security gain.
Another advantage, I can use the tools of the Hofladers if necessary, again with the front loader of the tractor, which was not possible before. For some devices, I have therefore in addition to the device-side MSW Coupler mounted normal hydraulic couplings, on which I can couple the devices with the front loader without MSW.
I would appreciate if some front loader or yard loader manufacturers offered the MSW Coupler as an option at least.
What is very important to me as a technically skilled farmer, the system is very simple and robust, Standard Faster couplings are used, which can be obtained quickly from any agricultural machinery dealer or specialized dealer in case of replacement.
My conclusion: from practice, for practice
Pierre Witry
At the Sauerarbecht
L-4974 Dippach
We congratulate Mr. Witry on the technical implementation and wish him much pleasure with his Highspeed Oil Coupler.
Thomas Mosl
Luc Mangen
Goeblange, Luxembourg
Liebherr telescopic loader
Thanks to MSW all-rounder
I've wanted to buy a telescopic handler for a long time, but if so, then it should be equipped with a quick-change system similar to that from MSW. Since I've been installing the Highspeed Oil Coupler on the Stoll front loader for over a year, I just couldn't imagine a telescopic loader without the system, i.e. telescopic loaders with a quick-change system, like the one from MSW, wanted but not found. Since a telescopic handler became indispensable for my business, I personally drove to Telfs to the Liebherr company and persevered. After long arguments with Mr. Mösl and my dealer as well as the representative of the Liebherr company, we were able to come to an agreement and a solution was found. After completion of the machine, it was delivered from the factory to the MSW company and the high-speed oil coupler was installed. After an acceptance test by my dealer, the Liebherr company and myself, I was now very excited about my new work machine. Expectations were very high and I shouldn't be disappointed. Coupling is very easy and the telehandler has become an all-rounder. At home, the new devices for the machine were quickly converted, which is also child's play with the MSW system. Changing the different devices is now so easy and quick and without complaints, it is even fun to connect new devices over and over again. Clear the manure with the bite shovel, then attach the earth shovel to clean the edges of the wall, then connect the bale skewer with the bale gripper again to fill up the straw store and all without getting off the machine. All work can be done quickly and effectively in one go. Relocate silo bales, then move different pallets with a hydraulic pallet fork and then quickly clean the yard with the sweeper. Everything is now easy, thanks to Mr. Mösl's system. I will also equip other devices with the system, e.g. Hedge trimmers, feed pusher, etc ... A year ago, many of my colleagues said to me “I don't need it, it's a luxury”, but now, after seeing the devices and the system in action, many are interested, and some are becoming buy the part too. Price-performance ratio is great and I can only recommend the system to everyone. I hope that the manufacturers will also pay attention to this and include them in their options and install them immediately. A big thank you to Mr. Mösl who has simplified my daily work thanks to his system and a thank you to my dealer for his help with planning and his flexibility.
Mangen Luc
We would like to thank Mr Mangen Luc, Bertemes Guy (dealer) and Liebherr in Telfs for their confidence and support. Thomas Mosl
DI (FH) Georg Ibertsberger
HBLA for agriculture, origin
»Easy operation, even for inexperienced pupils.«
Our originator Hoftrac has been equipped since November with the hydraulic Mösl quick coupler 2017. Under the guidance of Mr. Mösl, the students of the Matura course adapted all the implements. Compared to conventional hydraulic coupling systems, the MSW system offers special advantages for use in origin:
- No ascending or descending required for coupling implements.
- No oil loss when coupling.
- Easy operation, even for inexperienced students.
- Unproblematic coupling with residual pressure in the pipes
- The conclusion of the project group: "A simple and brilliant idea!"
Facebook entry the HBLA origin
Herman Heindl
84140 Gangkofen
Kit for the front loader
- The high-speed oil coupler is indispensable on our farm
- For our bull fattening, we make several different daily mixes for filling and unloading our stationary mixer and also for the daily farm work we need different attachments.
- Previously, the devices were only changed, if it had to be necessarily, which meant that the devices were often misappropriated, which usually led back to follow-up problems.
- Pressure in the pipes, frequent dismounting, oil-smeared hands and clothing are now a thing of the past.
- Due to the enormous time savings and that always suitable device is used, the work quality and also the effectiveness enormously increased.
- The high-speed oil coupler has fully met my expectations and is fully recommendable
Herman Heindl
Family Strasser
Sankt Wolfgang, Upper Bavaria
"Simple, fast and safe"
The receiver for the front loader is in operation since December 2017 and with the help of the kit, the conversion was no problem. Since then, the simple and quick change of equipment works without leaving the tractor. This saves time and reduces the risk of accidents.
Mangen Luc
Goeblange, Luxembourg
(Frontloader kit)
"I can only recommend the High Speed Oil Coupler System to EVERYONE!"
For a long time I was looking for a good quick change system, which would meet my requirements. Already 11 years ago, when I bought my tractor with front loader, I looked for a quick change system, but I did not find the right one. That's why I had it equipped with hydraulic locking and Faster 2. Since I often have to change the equipment on the day, seemed to me over the years, many climb up and down, the clutch on and off too unsafe and way too uncomfortable. More and more devices were misappropriated and this has caused some damage.
Then I became aware of the high-speed oil coupler. During our Austria winter holidays we made an appointment to the view of Mr. Mösl. I was immediately enthusiastic about the system and 3 days later, before we started the trip home, a small detour was accepted and the system was loaded into the car and off to Luxembourg.
Now, 2 months later, I'm still totally excited about it. The coupling is very fast and it is even fun again and again to change the tools. Even, because everything is now easier, I have already retrofitted other little things on the implements, for example: bale skewer with hydraulic folding of the tines for a safer road transport.
Easy assembly on the front loader and other equipment, simple operation, great service and very competent advice (if you have questions always get expert information over the phone)
A new front loader or telehandler is only available in combination with the Highspeed Oil Coupler.
Christian Wolfgruber
Teisendorf, Terex wheel loader
»I am very satisfied with the Highspeed Oil Coupler. Everything works fine, I could not imagine it better. "
If everything went so smoothly, it would be fun to work. The high-speed oil coupler saves me the constant getting on and off of my loader and makes me so much more effective and flexible in my way of working.
Christina Flotzinger, Hans-Peter Höllinger
Ort im Innkreis, Weidemann 1350 CC45
»We were positively surprised by the" Highspeed Oil Coupler "
It has exceeded all expectations. It not only saves time, but also money (fuel, engine wear, etc.). Especially with the daily filling of the feed mixer wagon, where the devices have to be changed several times, this system is indispensable.
Thomas Neumayr
Anthering / Salzburg
"In the High Speed Oil Coupler, I see the benefits of putting devices in easy-to-handle, easy-to-handle, easy-to-handle, and non-dismountable operation."
It saves time and can be easily operated by other people who are not so technically skilled.
Company Huber-Braumann
2 x Weidemann 1255
»Huber-Braumann would like to thank you for the great development of a quick-change system where hydraulics and electricity are coupled at the same time.«
The system is used by us on two identical Weidemann 1255, where constant change of attachments is necessary.
A quick and effective work is thereby made possible. It saves us a lot of time and nerves when changing gears, and above all, we always use the right attachment for the current work. The system has been in use for about 2 years and works fine.
I would like to thank Mr Mösl Thomas and look forward to further good cooperation on behalf of the Huber-Braumann Team.
Alois Stadler
Freinberg, Weidemann and Fuchs Hoflader
"The constant loss of oil when changing the hydraulic lines and the problems with the pressure on the lines were annoying me."
So I've been looking for a workable and comfortable solution that eliminates this problem. I found these in the High Speed Oil Coupler of MSW-GmbH. In 5 seconds I can attach or disconnect my devices without having to dismount. It does not matter now whether the devices are in the sun or not, also here the dome operation works simply and without oil loss.
I chose two vehicles for the Highspeed Oil Coupler, which are compatible with each other, which makes work even more practical.
For me it was the right decision because I do not have to leave the vehicle constantly to change. In addition, the swapping, and the tearing of a line is now impossible.
Franz Hametner
Steyregg
"It's like the farm loader, once you have a high-speed oil coupler, you can not and do not want to do without the benefits of this device."
For me, the decision for the high-speed oil coupler was very clear.
Before the system, of course, switching was avoided as much as possible, and that's why we often "mumbled" with the wrong tool.
Nevertheless, it was unavoidable that we had to dismount two to three times a day from the farm loader to disconnect or connect the hydraulic lines. By the High Speed Oil Coupler our work has become much more effective and above all more comfortable. The descent is completely eliminated - we do not need to leave the cabin. Change is now much more often and we are still faster, because the right tool is used for the appropriate work. As a result, my farm loader and implements are used more gently. The hydraulic oil loss is zero and the operating hours on my farm loader have been reduced which, of course, has resulted in extended service intervals.
For me, the profit from the quick-change system lies in the duping process, and much more in the more rational way of working, which saves a considerable amount of time.
Josef Wimmer
Mattsee
»Significant time savings when changing devices!«
For every application, the right device is coupled, even if it is only briefly in use - higher work efficiency - flexible deployment organization through frequent device replacement; Work that is otherwise postponed (for example: attaching the sweeper due to 30 m turning roads) is now carried out "by the way"; very simple operation - even personnel who are usually unable to Hydraulic u. Coupling electric cables can now couple all devices; no hassle with pressurized lines when coupling, compact design, retrofittable to existing equipment
Rupert Wallner
Henndorf
»No oil loss, no pressure on the lines when coupling, easy operation
even for the inexperienced - simple conversion - always suitable tool! «
Salzburg farmer, issue March 2014
»Hydraulic pipes comfortable and secure under pressure«
That his invention is robust and well thought-out, he proves with a not so gentle dome process in front of the photographer.
Advanced farmer, issue 7 / 2014
»Practical tip: changing implements quickly and easily«
Expects a time savings in coupling at least 90 percent. In addition, his system can also be used to connect pressurized hydraulic lines.